An effective method of bulk materials moisture measurement using capacitive sensors

When we speak about capacitance moisture meters for bulk materials we have to face with different values of dielectric permittivity for different bulk materials in dehydrated state, what causes a method error that can be named ‘type uncertainty’. Besides, different varieties of the same material have different values of dielectric permittivity, which depend from geographical origin, processing conditions etc. It can be hardly predicted automatically and type uncertainty can be compensated only in separate situations with the help of preliminary calibration. Main tasks of the research are to develop new comparison principle of moisture measurement with better accuracy due to effective compensation of physical, chemical and granulometric composition influence on the result of moisture measurement, develop new primary and secondary instrument transducers. Moisture sensor consists of four measuring capacitors. Two of them should be filled with a sample, which moisture content should be determined, and other pair of measuring capacitors should be filled with a same substance, but previously dehydrated. Mathematical models, developed to take into account granulometric composition of a bulk material were used to carry out a comparison analysis for three types of instrument measuring transducers. Obtained results proved that suggested principle of moisture measurement provides effective compensation of granulometric composition influence. Developed measuring principle had been experimentally tested what helped to confirm that it provides two times better compensation of different physical and chemical composition for different materials in comparison with the direct comparison method.     

High performance multi-layer varistor (MLV) from doped ZnO nanopowders by water based tape casting: Rheology,sintering, microstructure and properties

In this work, we report the fabrication of a high performance multi-layer varistor (MLV) via water based tape casting method using novel compositions of nanomaterials. Bi₂O₃, CaO and Co₃O₄ doped ZnO nanopowders were prepared by solution combustion synthesis (SCS) route, calcined at different temperatures (550, 650, 750 and 850?°C) and characterized by TEM, XRD, SEM and AFM. The nanopowder (crystallite size ~30?nm) calcined at 650?°C for 1?h was used as the starting material for MLV fabrication. Compositions of the slurry containing doped ZnO nanopowders, binder and plasticizer in water solvent were optimized for the fabrication of thick film. The rheological properties of the slurries having different solid loadings were analysed and thick films of various thicknesses (50–500?µm) were prepared by varying the feeding rate of tape casting. The film roughness of 38.3?nm for the thick film made from 40?wt% solid slurry was found to be superior compared to other samples due to the presence of reduced crack and shrinkage. MLV fired at 950?°C for 1.5?h exhibited a coefficient of nonlinearity of 18 and breakdown voltage of 291.5?V that yields superior properties compared to commercial MLVs.     

Anderson Acceleration for Nonconvex ADMM Based on Douglas-Rachford Splitting

The alternating direction multiplier method (ADMM) is widely used in computer graphics for solving optimization problems that can be nonsmooth and nonconvex. It converges quickly to an approximate solution, but can take a long time to converge to a solution of high-accuracy. Previously, Anderson acceleration has been applied to ADMM, by treating it as a fixed-point iteration for the concatenation of the dual variables and a subset of the primal variables. In this paper, we note that the equivalence between ADMM and Douglas-Rachford splitting reveals that ADMM is in fact a fixed-point iteration in a lower-dimensional space. By applying Anderson acceleration to such lower-dimensional fixed-point iteration, we obtain a more effective approach for accelerating ADMM. We analyze the convergence of the proposed acceleration method on nonconvex problems, and verify its effectiveness on a variety of computer graphics including geometry processing and physical simulation.     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

A simplified physically-based breach model for a high concrete-faced rockfill dam: A case study

A simplified physically-based model was developed to simulate the breaching process of the Gouhou concrete-faced rockfill dam (CFRD), which is the only breach case of a high CFRD in the world. Considering the dam height, a hydraulic method was chosen to simulate the initial scour position on the downstream slope, with the steepening of the downstream slope taken into account; a headcut erosion formula was adopted to simulate the backward erosion as well. The moment equilibrium method was utilized to calculate the ultimate length of a concrete slab under its self-weight and water loads. The calculated results of the Gouhou CFRD breach case show that the proposed model provides reasonable peak breach flow, final breach width, and failure time, with relative errors less than 15% as compared with the measured data. Sensitivity studies show that the outputs of the proposed model are more or less sensitive to different parameters. Three typical parametric models were compared with the proposed model, and the comparison demonstrates that the proposed physically-based breach model performs better and provides more detailed results than the parametric models.     

New empirical correlation for estimation of vaporization enthalpy of algerian saharan blend petroleum fractions

A Real-coded Genetic Algorithm has been used to develop a new correlation to estimate the enthalpy of vaporization for pure compounds and petroleum fractions as a function of the normal boiling point and specific gravity. In developing the correlation 80% of the data was used and the remaining are used for validation. The results of the proposed correlations are compared to others in literature. The comparison indicates that the proposed model is simple to use and more accurate than the most common correlations for predicting the enthalpy of vaporization of pure compounds and petroleum fractions.     

井下安全阀力学性能分析

井下安全阀对安全性和可靠性要求较高。以渤海油田常用油管携带式井下安全阀为分析对象,对其工作压力、地面控制压力、全开启和全关闭压力、最大下入深度和自平衡能力等关键力学性能进行分析。井下安全阀的工作压力值与地面液控压力值相等,其选取依据为井口压力; 全开启和全关闭液控压力值可通过压力曲线法得到; 最大下入深度取决于弹簧安装时的预紧力; 自平衡能力与活塞面积和自平衡孔面积的比值有关,比值越大,自平衡能力越强。     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.